Operation Manual

Getting Ready to Embroider

Connecting Machine to Power Supply

Always use the power supply cord that came with

the machine.

To connect machine to power supply, turn off

the power switch q. Insert machine plug w into

the machine and the power supply plug e into

the wall socket.

Your machine may come equipped with a polarized

plug (one prong wider than the other). A polarized

plug reduces the risk of electrical shock. This plug is

intended to fit into a polarized outlet. If the plug does

not fit fully into the outlet, reverse the plug. If it still

does not fit, contact a qualified electrician to install

the proper outlet. Do not modify the plug in any way.

For Your Safety

Do not use extension cords or plug adapters.

Do not touch plug with wet hands.

Always turn off the power/light switch first and then

unplug from the electrical outlet. Examples:

• when leaving the machine unattended

• when cleaning the machine

• when attaching or removing parts such as

needle or needle plate

Do not place heavy items on cords. Do not subject

cords to heat. Do not use damaged cords. Have the

cord repaired immediately.

While the machine is in operation, always keep your

eye on the sewing area and do not touch any

moving parts such as the thread take-up lever,

flywheel or needle.