Operation Manual

Threading the Machine

Raise the presser foot with the presser foot lever.

Hand turn the flywheel (always turn towards you)

to bring the needle up to its highest position.

Using both hands, pull thread towards left and

insert thread into slit

Pull thread toward and around guide . (Thread

pathway is indicated on the machine with solid

line.)

Guide the thread down right channel and around

the thread holder .

Pull the thread up the left channel to the take-up

lever. Firmly pull the thread from right to left, over

the take-up lever and down into the take-up lever

eye r.

Proceed down left channel and through the lower

thread guide t.

Slide the thread to the left behind the needle bar

thread guide y.

Thread the needle from front to back manually or

use the built-in needle threader. See page 38.