Operation Manual

100
Attaching the Straight Stitch Needle Plate
Use the straight stitch needle plate for embroidery.
Turn the power switch on.
Raise the needle by pressing the needle up/down
button.
Press the lockout key and raise the presser foot with the
presser foot lifter button.
q
Presser foot lifter button
Remove the extension table.
Push down the needle plate release lever and the needle
plate will snap off.
A message will appear warning that the needle plate is
not secured.
Remove the needle plate.
w
Needle plate release lever
Attach the hook cover to the straight stitch needle plate.
Place the straight stitch needle plate in the opening for
the needle plate.
Match the left edge of the needle plate with the opening.
Push the mark on the needle plate down until it locks in
place.
The warning message disappears and a confirmation
message will appear.
Press the X key and the machine automatically selects
the straight stitch.
q
w