Operation Manual

12
Inserting the bobbin
z
Press the lockout key. Place the bobbin in the bobbin
holder with the thread running off counterclockwise.
q
Lockout key
x
Guide the thread into the front notch on the bobbin
holder.
w
Front notch
c
Draw the thread to the left, sliding it between the
tension spring blades.
e
Tension spring blades
v
Continue to draw the thread gently until the thread
slips into the side notch.
r
Side notch
b
Pull out about 10 cm (4˝) of thread to the rear.
Reattach the hook cover plate.
Press the lockout key to unlock the machine.
t
Hook cover
NOTE:
The threading chart is shown on the hook cover for your
reference.
z
r
x
c
v
b
e
w
t
q