Datasheet

ManualsBrandsELNEC ManualsChip ProgrammersBeeProg2C

BeeProg2C

(ord.no. 60-0059)

Extremely fast universal USB interfaced programmer.

Cost effective version of BeeProg2 programmer (differences see below). If you need to program some of the

mentioned devices, see BeeProg2 programmer.

Short description:

69745 supported devices from 285 manufacturers by

2.91 version of SW (16. Aug. 2012)

extremely fast programming, one of the fastest

programmers in this category. Programs 64-Mbit NOR

Flash memory less than 9 seconds and 1Gbit NAND

Flash less than 70 sec.

48-pins powerful pindrivers, no adapter required for

any DIL devices

ISP connector for in-circuit programming

connection to PC: USB 2.0 (up to 480 Mbit/s, high

speed/full speed) and 1.1 compatible interface

after upgrade to BeeProg2, also high-speed IEEE 1284

(ECP/EPP) printer-port (LPT) interface is available

comfortable and easy to use control program, work

with all versions of MS Windows from Windows 2000 to

Windows 7 64-bit

unique quick reaction to customer's needs - software

update can be ready within a day from request by OnDemand software

Multiprogramming possible by attaching more programmers to one PC

approved by CE laboratory to meet CE requirements

made in Slovakia

warranty - 3 years

Optional accessories:

Programming Adapters (Socket Converters)

Accessories: Calibration test POD, Vacuum pen, LPT port cable, ...

Features

GENERAL

BeeProg2C is USB-compatible, MS Windows (from Windows 2000 to Windows 7 64-bit) based ELNEC universal

programmers, built to meet the strong demand of the small manufacturing and developers community for the

fast and reliable universal programmer.

BeeProg2C programmer have hardware identical with the BeeProg2 programmer, the differences are only in

software. BeeProg2C have next limitations against BeeProg2:

unsupported obsolete bipolar chips (PROMs and PLDs)

unsupported obsolete EPROMs with programming voltage 21V and above

unsupported obsolete 2708 EPROMs

unsupported obsolete microcontrollers MCS48 series

unsupported obsolete microcontrollers 8751/8752 with programming voltage 21V and above

LPT port connection usage is disabled in software

BeeProg2C programmer can be any time upgraded to BeeProg2 using BeeProg2C to BeeProg2 upgrade kit

Supports all kinds of types and silicon technologies of today and tomorrow programmable devices without

family-specific module. You have freedom to choose the optimal device for your design. Using built-in in-circuit

serial programming (ISP) connector, the programmer is able to program ISP capable chips in circuit.

BeeProg2C isn't only a programmer, but also a tester of TTL/CMOS logic ICs and memories. Furthermore, it

allows generation of user-definable test pattern sequences.

Provides very competitive price coupled with excellent hardware design for reliable programming.

Extremely fast programming due to high-speed FPGA driven hardware and execution of time-critical

routines inside of the programmer. As a result, when used in production this one-socket-programmer waits for

an operator, and not the other way round.

BeeProg2C interfaces with the IBM PC compatible or higher, portable or desktop personal computers through

USB (2.0/1.1) port. After upgrade to BeeProg2 can be also used parallel (printer) port.

1 of 7

Summary of content (7 pages)

PAGE 1
BeeProg2C (ord.no. 60-0059) Extremely fast universal USB interfaced programmer. Cost effective version of BeeProg2 programmer (differences see below). If you need to program some of the mentioned devices, see BeeProg2 programmer. Short description: 69745 supported devices from 285 manufacturers by 2.91 version of SW (16. Aug. 2012) extremely fast programming, one of the fastest programmers in this category. Programs 64-Mbit NOR Flash memory less than 9 seconds and 1Gbit NAND Flash less than 70 sec.
PAGE 2
HARDWARE FPGA based totally reconfigurable 48 powerful TTL pindrivers provide H/L/pull_up/pull_down and read capability for each pin of socket. Advanced pindrivers incorporate high-quality high-speed circuitry to deliver signals without overshoot or ground bounce for all supported devices. Improved pin drivers drivers operate down to 1.8V so you'll be ready to program the full range of today's advanced low-voltage devices.
PAGE 3
Keep-Current service Keep-Current service means, that ELNEC ships the latest version of programmer software and updated user documentation (Keep-Current package) to customer . The Keep-Current service is your hassle-free guarantee that you achieving the highest quality programming on ELNEC programmers, at minimal cost.
PAGE 4
EEPROM: NMOS/CMOS, 28xxx, 28Cxxx, 27EExxx series, with 8/16 bit data width Flash EPROM: 28Fxxx, 29Cxxx, 29Fxxx, 29BVxxx, 29LVxxx, 29Wxxx, 49Fxxx series, Samsung's K8Fxxxx, K8Cxxxx, K8Sxxxx, K8Pxxxx series, from 256Kbit to 1Gbit, with 8/16 bit data width, full support for LV series NAND FLASH: Samsung K9xxx, Hynix HY27xxx, Toshiba TC58xxx, Micron MT29Fxxx, Spansion S30Mxxx, Numonyx (ex STM) NANDxxx LBA-NAND: Toshiba THGVNxxx mDOC H3: SanDisk (ex M-Systems) SDED5xxx, SDED7xxx, MD2533xxx, MD2534xxx, Hynix HY23
PAGE 5
1-Wire E(E)PROM: DS1xxx, DS2xxx Serial Flash: standard SPI (25xxx), DataFlash (AT45Dxxx, AT26Dxxx) Microcontrollers Atmel: AT89Sxxx, AT90pwm, AT90can, AT90usb, AT90Sxxxx, ATtiny, ATmega, ATxmega, AT89LSxxx, AT89LPxxx Microcontrollers Atmel AVR32: AT32UC3xxxx Microcontrollers Chipcon (TI): CC11xx, CC24xx, CC25xx series Microcontrollers Cypress: CY8C2xxxx Microcontrollers Elan: EM78Pxxx, EM6xxx series Microcontrollers EM Microelectronic: 4 and 8 bit series Microcontrollers Microchip PICmicro: PIC10xxx, PIC12x
PAGE 6
SOFTWARE Algorithms: only manufacturer approved or certified algorithms are used. Custom algorithms are available at additional cost. Algorithm updates: software updates are available regulary, approx. every 4 weeks, free of charge. OnDemand version of software is available for highly needed chips support and/or bugs fixes. Available nearly daily. Main features: revision history, session logging, on-line help, device and algorithm information.
PAGE 7
operating humidity 20%..