User manual

ELNEC s. r. o.

• interprete the VME files compressed binary variation of SVF files

• security

• insertion test, reverse insertion check

• contact check

• ID byte check

• special

• production mode (automatic start immediately after device insertion)

• lot of serialization modes (more type of incremental modes, from-file mode, custom

generator mode)

• statistic

• count-down mode

Buffer operations

• view/edit, find/replace

• fill/copy, move, byte swap, word/dword split

• checksum (byte, word)

• print

File load/save

• no download time because programmer is PC controlled

• automatic file type identification

Supported file formats

• unformatted (raw) binary

• HEX: Intel, Intel EXT, Motorola S-record, MOS, Exormax, Tektronix, ASCII-SPACE-HEX,,

ASCII HEX

• Altera POF, JEDEC (ver. 3.0.A), e.g. from ABEL, CUPL, PALASM, TANGO PLD, OrCAD

PLD, PLD Designer ISDATA, etc.

• JAM (JEDEC STAPL Format), JBC (Jam STAPL Byte Code), STAPL (STAPL File) JEDEC

standard JESD-71

• VME (ispVME file VME2.0/VME3.0)

• SVF (Serial Vector Format revision E)

• STP (Actel STAPL file)

GENERAL

• operating voltage 110-250V AC

• power consumption max. 20W active, about 2W sleep

• dimensions 195x140x55 mm (7.7x5.5x2.2 inch)

• weight 0.9kg (1.98 lb)

• operating temperature 5°C ÷ 40°C (41°F ÷ 104°F)

• operating humidity 20%..80%, non condensing