User manual

Pg4uw
Note: When using device socket adapters with some passive or active parts, for example
capacitors for bypassing supply voltage, the Automatic YES! function may need to set these
pins to Pins with capacitors list. This is necessary to make Automatic YES! function working
properly. Otherwise Automatic YES! function will "think" the pins are still connected and it will
not allow user to insert new device and start new programming.
Programmer / Selftest
Command executes a selftest of current programmer without diagnostic POD. We strongly
recommend execute also Programmer / Selftest plus of programmer, because Selftest
procedure without diagnostic POD is not able to check whole programmer and to discover (if
exist) some special errors.
Programmer / Selftest plus
Command executes a selftest plus of current programmer using diagnostic POD, which is
included in standard delivery of programmer.
Recommendations how often run Selftest plus you can find at Maintenance section.
Programmer / Self test ISP connector
Command executes a selftest of ISP connector of current programmer using diagnostic POD
for ISP connectors.
Diagnostic POD for ISP connectors is necessary to use for testing 6 and 10-pin ISP
connectors of programmers. Diagnostic POD for ISP connectors is available as optional
accessories for programmers with 6-pin and 10-pin ISP connector (BeeProg, SmartProg2,
SmartProg, PIKprog2, PIKprog+, T51prog2 and T51prog). The order number: 70-0208
Schematic of Diagnostic POD for ISP connector (if you are in hurry):
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20 21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
J1
DIP40 to ZIF socket
ZIF 1
ZIF 2
ZIF 3
ZIF 4
ZIF 5
ZIF 6
ZIF 7
ZIF 8
ZIF 9
ZIF 11
1 2
3 4
5 6
7 8
9 10
J2
HARTING 09185106324
1 2
3 4
5 6
J3
HARTING 09185066324
1 2
HR1A 47R
3 4
HR1B 47R
56
HR1C 47R
ZIF 7
ZIF 4
ZIF 9
ZIF 1
ZIF 2
ZIF 3
ZIF 5
ZIF 6
ZIF 8
ZIF 11
ZIF 2
ZIF 3
ZIF 4
ZIF 5
ZIF 6
ZIF 8
Sequence for testing 6 pins ISP connector:
1. Insert Diagnostic POD for ISP connectors into ZIF socket of the programmer. Diagnostic
POD for ISP connectors must be inserted as 40 pins device.
135