User manual

Pg4uw
• After programming of all sub-devices is completed (or error occurs), standard "Repeat"
dialog is displayed. Programmed device can be removed from programmer socket and
new device can be inserted. Pressing Yes button in dialog Repeat or YES! button on
programmer *, will start multichip device programming sequence again.
* If Automatic YES! function is turned on, no Repeat dialog is displayed after device
operation is completed, but Automatic YES! window will appear. The window shows
status of programmer socket and notice about removing of programmed device and
inserting of new device to programmer socket. After inserting of new device, multichip
device operation sequence will start automatically. For more details about Automatic YES!
function, please take a look at Programmer / Automatic YES!.
For multiprogramming by Pg4uwMC or standalone programmer:
• Load Multi-project by Load project menu.
• Run wished device operation by one of available device operation buttons (Blank, Verify,
Program, Erase), mostly Program device operation is used. Selected device operation is
executed as sequence of sub-project loading and consequent sub-device programming
for each sub-device defined in Multi-project. The side effect of this concept is, that device
progress indicators are reset to 0 at beginning of each sub-device operation, so it looks
like progress bar is "jumping" to 0 few times while multichip operation is running.
• After programming of all sub-devices is completed (or error occurs), information with
result of device operation is displayed in Pg4uwMC. Programmed device can be removed
from programmer socket and new device can be inserted. Pressing operation button for
the Site or YES! button on programmer Site *, will start multichip device programming
sequence again.
* If Automatic YES! function is turned on, sequence of device operation is started again
automatically after removing of programmed and inserting of new device to programmer
socket. For more details about Automatic YES! function, please take a look at
Programmer / Automatic YES!.
Notes:
• serialization is not supported in multiprogramming mode (only single programming
supports serialization)
• count-down function is not supported now
Options / Save options
This command saves all settings that are currently supported for saving, even if auto-save is
turned off. Following options are saved: options under the Options menu, ten last selected
devices, file history, main program window position and size.
Help
Menu Help contains commands that let you view supported devices and programmers and
information about program version too.
Pressing the <F1> key accesses the Help. When you are selecting menu item and press
<F1>, you access context-sensitive help. If Pg4uw is executing an operation with the
programmer <F1> generates no response.
The following Help items are highlighted:
• words describing the keys referred to by the current Help
147