Technical information

5
Dynamic ADL range storage heaters use o -peak electricity, storing heat at a greatly reduced ost and heating your home 24 hours a
day. ADL dynamic storage heaters are designed to use the highest quality thermal insulation and have optimum dimensions.
ADL dynamic storage heaters use a silent fan which discharges the heat as and when the user requires. Thanks to these features,
ADL dynamic storage heaters are easily regulated, retaining the heat inside when it is not needed. They are very versatile units,
recommended for use in houses, commercial premises, o ces and in general on any site where heat distribution is required at set
hours and in a precise way.
Operating with an ambient thermostat, supplied as accessory, an ideal temperature over the whole dwelling is achieved.
Technical features:
- Low speed silent fan.
- Hot air/fresh air mixer with thermostat for a homogenous air output.
- Charging thermostat with sensor tube.
- Safety thermostat with manual reset.
- Microtherm G 25 mm insulation.
- Front and side air chambers.
- Powder coated RAL 9010 steel structure.
- It works together with Ambient Thermostats TA3, CPT10 and X2D, available
as accessory.
- Compatible with Delta 60 storage energy manager, available as accessory.
ADL range, Dynamic Storage Heaters
Model ADL-2012 ADL-3018 ADL-4024 ADL-5030
Input (W) 2000 3000 4000 5000
Acumulated energy kWh 16 24 32 40
Total weight (kg) 121 173 225 277
Lenght (cm) 63 81 99 117
Width (cm)* 24 24 24 24
Height (cm) 66 66 66 66
Number of blocks
12 18 24 30
(unit weight 7,5 kg)
Units per pallet:
- 1200x800 mm. 8 8
- 1200x1000 mm. 8 8
EAN 13 8432336200106 8432336200205 8432336200304 8432336200403
*Plus 2cm separated from the wall
Dynamic Storage Heaters