User manual

UserManual:1528L
SW200095RevA,Page19of39
Chapter 3: Operation
About Touchmonitor Adjustments
Your touchmonitor will unlikely require adjustment. Variations in video output and
application may require adjustments to your touchmonitor to optimize the quality of the
display.
For best performance, your touchmonitor should be operating in native resolution, that
is 1024x768 at 60-75 Hz. Use the Display control panel in Windows to choose
1024x768 resolution. Operating in other resolutions will degrade video performance.
For further information, please refer to Appendix A. All adjustments you make to the
controls are automatically memorized. This feature saves you from having to reset the
choices every time the power is unplugged or the touchmonitor is turned off and on. If
there is a power failure, your touchmonitor settings will not default to the factory
specifications.
To restore factory set up, choose it from the OSD. See Recall Defaults.