User manual
UserManual:1528L
SW200095RevA,Page25of39
Chapter 6: Touchmonitor Safety
This manual contains information that is important for the proper setup and
maintenance of your touchmonitor. Before setting up and powering on your new
touchmonitor, read through this manual, especially Chapter 2 (Installation), and Chapter
3 (Operation).
1. To reduce the risk of electric shock, follow all safety notices and never open the
touchmonitor case.
2. Turn off the product before cleaning. (See page 19 for Cleaning Instructions.)
3. Your touchmonitor is equipped with a 3-wire, grounding power cord. The power
cord plug will only fit into a grounded outlet. Do not attempt to fit the plug into an
outlet that has not been configured for this purpose. Do not use a damaged
power cord. Use only the power cord that comes with your Elo TouchSystems
touchmonitor. Use of an unauthorized power cord may invalidate your warranty.
4. The slots located on the sides and top of the touchmonitor case are for
ventilation. Do not block or insert anything inside the ventilation slots.
5. It is important that your touchmonitor remains dry. Do not pour liquid into or onto
your touchmonitor. If your touchmonitor becomes wet do not attempt to repair it
yourself.