2009 Tyco Electronics. All rights reserved. Elo TouchSystems, TE logo, and Tyco Electronics are trademarks.
Magnetic Stripe Reader (MSR) Installation Instructions Open the box containing the MSR kit. Align and insert mounting screws into holes and tighten using a Philips screwdriver. Verify kit contents: 4MSR device with USB cable (1) 4Mounting screws (2) 4TouchTools Driver software CD (1) Attach USB cable from MSR device to the USB port on the rear of the computer. Place monitor face down on a clean, soft and smooth surface. Turn on power to the computer.