User guide

MODEL IDENTIFICATION

LD9 __ __ __ - __ __

X = Double Sided Display

PT = Pass Thru

25 = DB25F connector to computer

POWER ADAPTER

0 = 120VAC*

COMMAND SET 1 = 220VAC

0 = LOGIC CONTROLS*

1 = LOGIC CONTROLS SERIAL/PARALLEL INTERFACE

WITH PASS-THRU 0 = SERIAL 9600 BAUD*

2 = SPECIAL COMMAND SET 1 (Aedex emulation) 1 = SERIAL 600 BAUD

3 = SEPCIAL COMMAND SET 2 (Noritaki emulation) 2 = SERIAL 1200 BAUD

4 = SPECIAL COMMAND SET 3 (Epson D202 emulation) 3 = SERIAL 2400 BAUD

5 = SPECIAL COMMAND SET 4 (Ultimate PD1100XL/XLT) 4 = SERIAL 4800 BAUD

9 = OPOS COMMAND SET 5 = SERIAL 19200 BAUD

9 = PARALLEL INTERFACE

* Default Values

** Call for description of Command Sets

CARTON CONTENTS

1. Pole display, pre-assembled.

2. Interface cable, comes with a DB9F connector (to computer) and a

DIN6F connector (to pole display) as standard equipment.

Optional DB25F connector (to computer) is available.

Note: This cable is only supplied with standard serial pole displays

with no pass-thru function. Other interface options will have

different cables.

3. Transformer adapter 120VAC to 6.0VAC (optional 220VAC).

4. Metal base plate with mounting hardware.

5. Quick Installation Guide.