User guide

SecuGen _______________________________________________________ Products -1
PC Peripheral Type,
USB Fingerprint Recognition Devic
e
FDU02
SGD
0
3
-
03210001
A
SecuGen FDU02
General Description
FDU02 is a Fingerprint Capture Device that
supports the USB (Universal Serial Bus)
interface and can do hot attachment, Plug &
Play and alternate functions. The FDU02 can
also support the PS/2 mouse interface and
without a specific mouse driver. But for
fingerprint sensor functions, the user must
install a fingerprint sensor specific driver. The
FDU02 uses bulk mode to transfer fingerprint
image data and three bulk modes to control
the USB interface board. Bulk mode allows
multiple devices to be connected to a PC at
one time.
Feature
- USB 1.1 compliant
- Supports alternate function
- Supports PS/2 mice Interface
- Supports remote wakeup
- No additional power supply needed
(Bus-powered device)
- Immune to electrostatic discharge
Specifications
Supply Voltage:
- Min. 4.75V, Typ. 5.0V, Max. 5.25V
Current Consumption
- SecuGen Hamster III: 60mA (Max)
- SecuGen OptiMouse: 110mA (Max)
- Suspend current: 450uA (Max)
Operating Temperature: 0? ~60? (MAX)
Image Capture Speed: 400ms / frame
Pixel Resolution: 260 x 300
USB Signal Type:
- USB Spec 1.1, High Speed
Application
 Fingerprint Recognition Hamster
 Fingerprint Recognition Mouse
 Fingerprint Recognition Keyboard
 Fingerprint Recognition Smartcard
 Client/Server Solution