User manual

User Manual: X-Series Rev A AiO Touchcomputer
SW602213 Rev A, Page 35 of 51
Near Field Communication KIT (E001004)
You can optionally add a NFC KIT to the X-Series touchcomputer to any of the three mounting
locations located on the display head top, left, and right of the touchcomputer
The NFC KIT is a USB 2.0 device and compatible design for X-Series all configurations. The
NFC KIT is powered by the USB port; no external power is needed.
The NFC KIT specifications are shown in below table.
Feature
Spec Description
Standards
ISO 14443 TYPE A and B compliant
ISO 18092 compliant
Encryption
Encrypted card data (AES or Triple DES)
DUKPT key management with more than 2M keys
(model selectable)
Authentication with RSA 2048 bit key
Payment applications
American Express ExpressPay
Discover ZIP
MasterCard PayPass/MCHIP
Visa MSD/qVSDC
Google wallet (optional)
Apple Pay
Contact smart card
Contactless communication at 13.56MHz
Supports 2-SAM or 4-SAM board (optional)
Antennas
Build-in direct matching antenna
Remote 50 ohm matching antenna (optional)
Interface type
USB2.0 compliant / HID support
Standard RS-232 signal level
Power supply
5.0VDC +/- 0.25V
Power consumption
< 330mA (idle mode)
< 430mA (operation mode)
Temperature
-20°C to 70°C (Operating)
-30°C to 70°C (Storage)
Humidity
10 to 85% (Operating)
10 to 90% (Storage)