User's Manual

UM600106
Rev. A, page
16
of
32
User Manual – i-series 2.0
General Purpose Input/Output (GPIO) Support
The i-Series supports a GPIO which can be used under the following conditions:
Max Voltage: 5V
Max Current: 200mA
There are two input connections and one output connection.
Pin  5 Volt output connection
Pin 2  Input connection 1
Pin 3  Input connection 2
Pin 4 and Pin 5 are tied to ground
Elo has a cable (PN # E086398) which extends this GPIO connection so that it is easy for users to connect their own peripherals. This cable can be
found on the Elo website.
Example Circuit