User's Manual

User Manual:Elo
®
Tablet
SW602113 Rev A, Page 30 of 40
Chapter 4: Operation
Power
To turn the tablet on and off, press the tablet power button once.When the tablet is installed
onto the docking station, then thetabletcan also be turned on and off using the power button on
the docking station.
To gracefully shut down the tablet, follow the operating systems normal power off procedure.To
abruptly power off the tablet, press and hold either of the power button until the tablet shuts
off.In the event that your tablet does not respond and does not turn off via the power button,
reset the tablet by removing the battery.
A Power Status LED is provided on the tablet and docking stationthat functions according to the
following table:
Tablet/Dock
status
LE
D status
OFF OFF
SLEEP BLINKING
ON ON
The system consumes low power when in SLEEP and OFF modes. For detailed power
consumption specifications, refer to technical specifications available on the Elo website
www.elotouch.com.
Touching the screen (if set up to do so)will bring the monitor out of MONITOR SLEEP mode,
otherwise press the power button once to bring the unit out of sleep.
If long periods of non-use are planned, turn off tablet to save power.
The maximum voltage, frequency and current for the Elo Tablet, are provided in the power
ratings table below:
Operating Voltage
Range
Operating Frequency
Range
Operating Current
Range
Tablet 100 - 240Vac 50/60 Hz 0.15~0.35A