User's Manual

User Manual – PayPoint Android Rev B
UM600xxx Rev A, page 10 of 26
Power
Press the register power button to turn the Elo PayPoint Register on. Press and hold power button when the register is on
to bring up the Shut Down option screen.
In the event that the register freezes and does not respond, press and hold the power button until the register turns off.
If the register does not turn off via the power button, the register will need to be powered down by unplugging the
power cord from the wall.
The Elo PayPoint Register power button is equipped with an LED that indicates the power status of the register, as
follows:
Register Power Status
LED Status
OFF (disconnected from wall)
Off
OFF (connected to wall)
Red
SLEEP
Red
ON
White
The system consumes low power when in SLEEP and OFF modes. For detailed power consumption specifications, refer to technical
specifications available on the Elo website www.elotouch.com.
To bring register out of sleep/standby mode, press the power button once.
If long periods of non-use are planned, turn off the Elo PayPoint Register to save power.
The maximum voltage, frequency and current for the register, are provided in the power ratings table below:
Operating Voltage
Range
Operating
Frequency Range
Operating Current
Range
Elo PayPoint Register
100 - 240Vac
50 – 60 Hz
0.1 – 0.3 Aac