Setup guide

Palette
LIGHTING CONTROL CONSOLE INSTALLATION & SETUP GUIDE
20 DESK LAYOUT
6. Playback Controls Layout
The playback section of the desk provides controls for executing active cues and fading between two pre-stored
scenes. These faders consist of A/B and C/D pile-on, automatic timed sliders.
Playbacks
[Select] - Selects cue list to display and default record location. Amber LED will be solid when cue list is selected.
will flash when you halt a cue or you are backing up.
[Stop/Back] - Halts active cue (if running) or steps back to previous cue (if stopped). RED LED
[GO] - Activates next cue (following the active Cue) on the Cue List. Green LED will be solid when a cue list is
active and no cues are running. The Green LED will flash when cues are running. Both the Red and Green LEDs will
flash when the cue list is releasing.
[Playback Faders] - Controls fade times (in/out), cross faders, intensity masters, scene masters or, look page master.
[Rel - PB] - Releases currently selected playback or cue list.
[Step Up/Step Dn] - Arrows - Steps forward or backward through a selected cue list.
The playback faders can be setup to control different things as determined by the PALETTE software. See "A/B C/D
(X1 - X2)" on page 49 for more details or refer to "Hardware Setup" in the PALETTE Software Help Menu.