Setup guide

Palette
LIGHTING CONTROL CONSOLE INSTALLATION & SETUP GUIDE
24 CONSOLE BUTTONS
16. Number Buttons
• By default, typing on an empty command line, these buttons will select channels or channels.
• Use in conjunction with the other keys (+, -, Thru etc.) close to these to select ranges of channels.
• While in dialog boxes, these keys fill in numeric fields.
• To change cue times, use these buttons in conjunction with the [ARROW KEYS] and the [EDIT] button to open
the blue box for editing.
17. Record Button
Recording Cues:
• To record a cue, press the [REC] button. Then press the number of the cue you wish to record and hit [ENTER].
• Pressing [SHIFT] [RECORD] will open up the Record dialog box. A default cue number is entered and the cursor
is waiting for you to enter a new one (if necessary). The [ENTER] key will close the dialog box and record the cue
to the Selected Cue List.
• To quickly record to a different playback master, press [REC] then the desired [SELECT] key on the playback.
Recording Looks:
• To quickly record a Look, press [REC] then press a [BUMP] button.
• Press [REC] then press [LOOK], enter a number and hit [ENTER].
• To record a group of channels, press [REC] then press [GROUP], enter a number and hit [ENTER]. A Look will be
recorded (including the levels). Using the [GROUP] button, you can bring back the selected channels and set them
to any level using the [WHEEL] or the Keypad.
See also "Update Button" on page 27.
18. Release/Undo Button
• Press once to activate the UNDO feature.
• Press again (or twice) to release last altered attribute.
• Press again (third time) to release all selected channels.
• Press again (fourth time) to release all captured channels.
• Press [SHIFT] + [REL] to bring back previously released items. (This works in a three-stage process.)
Notes:
• If a dialog box is open, the LED will be flashing. Pressing [REL] will close the dialog box without changes being
committed.
• If channels are selected, the LED will be flashing.
• If channels have been changed but are not selected, the LED will flash in a stepped pattern.
19. Release Playback
• Pressing this button will release the cue list on the selected playback master. The cue pointer will remain at the cur-
rent cue position, therefore pressing [GO] will put you back into the same state you were in before you hit [REL
PB].
• Press [SHIFT] + [REL PB] to release all cue lists.