Setup guide

Palette
Select Button 25
LIGHTING CONTROL CONSOLE INSTALLATION & SETUP GUIDE
20. Select Button
• Press a Select button to determine which cue list cue will be written to by default when you record cues. The
'selected' cue list will have an Amber LED on.
• Pressing this button is the same as using the mouse to highlight a cue list in the cue list directory.
• To quickly record cues to a cue list (even if it is not the currently selected cue list) press [REC] then [SELECT].
The new cue will be appended to the end of the cue list and the current cue list selection will not change.
21. Shift Button
• Use with [RECORD] to open the Record dialog box.
• Use with [REL] to restore previously released channels.
• Use with [REL PB] to release all cue lists.
• Use with [EDIT] to enter the time display.
• Use with [STEP UP/DN] buttons to go to the top or bottom of a cue list.
• Use with [ARROW KEYS] to select a range of cells with the Blue Box.
• Use with [PREV NEXT] to select the previous channel to the current one or use with [PREV NEXT] in dialog
boxes to move the focus of the current control.
• Use with [GOTO CUE] to open the Goto Cue dialog.
• Use with [GO] to assert the appropriate cue list.
• Use with [BACK] to advance to the previous cue in cue time.
• Use with [MOVE COPY] to renumber cues or move Looks.
• Use with [BLIND LOAD] to enter or exit Blind mode.
• Use with [UP/DOWN] to adjust the selected channel's level by one percent.
• Use with Split Crossfaders or Single Crossfaders (A/B C/D fader setup under [S3] Hardware Setup) to manually
move backwards through a cue list.
• Use with Number keys 2,4,6 & 8 to access arrow keys.
• When the command line is empty, holding down [SHIFT] and rolling the wheel will scroll the channel grid.
• Use after pressing [REC] and before pressing [BUMP] or [SELECT], or [5X5] to keep Record dialog box open for
labeling.