Setup guide

Palette
Up / Down Buttons 27
LIGHTING CONTROL CONSOLE INSTALLATION & SETUP GUIDE
26. Up / Down Buttons
• Use these buttons to raise or lower the selected channels' intensity by the pre-determined level in [S2] "Show
Options."
• Use with [SHIFT] to move the selected channel's intensity one percentage point.
• In dialog boxes, these buttons will raise or lower number boxes by pre-determined levels (cue number by 10, time
by 10, SMPTE by 1 minute etc.).
27. Update Button
• When making changes live, pressing [UPDATE] will open the Update dialog box. Pressing [ENTER] will update
the current cue with the changed levels.
• If you have changed tracking levels or palettes, you can select different items from the list to update (i.e. Track
Back and Palette Update).
• If you have used the [LOAD] button to load a Cue or Look, once you make the changes, press [UPDATE] to store
the changes and release any selected channels. (You will not be able to use this button if you did not use All
Attributes during your load operation.)
28. View
• Opens the View Properties dialog box where properties are displayed:
• Press [VIEW] [NUMBER] [ENTER] to see a channel's Label dialog box.
• Press [VIEW] [SELECT] to get a Cue List's properties.
• Press [VIEW] [BUMP] to get a Look Master Properties (including the ability to delete a Look).