Setup guide

Palette
LIGHTING CONTROL CONSOLE INSTALLATION & SETUP GUIDE
42 SOFTWARE CONFIGURATION
Step 3. Click "OK." The screen may blank for a moment or two and may ask you if you want to keep the settings. If
you monitor cannot handle the new resolution after a short period of time, the settings will revert to their
original state.
Step 4. Inside of the PALETTE software, move the mouse over the line separating the channel Grid from
the Cue List until it turns into the symbol shown at the right.
Step 5. Click on the vertical line and hold down the mouse button to adjust the width of the Channel Grid
display.
OR:
Right-click once the symbol (shown above) appears, and select a set Channel Grid size from the right-click
menu.
Changing the Screen Saver
By default, the screen saver is set for 15 minutes (of inactivity).
To change the screen saver:
Step 1. From the Control Panel, choose the "Screen Resolution/Screen Saver" button.
Step 2. Select the "Screen Saver" tab.