Setup guide

Palette
LIGHTING CONTROL CONSOLE INSTALLATION & SETUP GUIDE
48 ACCESSORY - HARDWARE COMPONENTS
ACCESSORY - HARDWARE COMPONENTS
1. Overview
The PALETTE console is highly configurable and can be set up in different ways depending on your requirements.
The Hardware Setup window provides setup options. Components such as slider and button array panels,
Grandmasters, triggers, and console lights can be configured by pressing the appropriate tab in the window.
To access the Hardware Setup window, select "Hardware Setup" from the main softkey menu. For more information
on setting up components, refer to "Hardware Setup" in the PALETTE Software Help Menu.
2. Channel Faders (Wide Mode)
On the presetPalette the sliders are set as channel Masters (Chan), this gives you direct HTP (Highest Takes
Precedence) control over the channels assigned to them (as determined by the combo to the far right). The assigned
channel will have an intensity as determined by the position of the slider and will be displayed in the channel grid
with the symbol below:
No other control (Look Master or Cue List) of any other priority can affect the intensity level of a channel set by a
channel Master.
Press tabs to bring up
configuration options for
hardware components