Setup guide

Palette
LIGHTING CONTROL CONSOLE INSTALLATION & SETUP GUIDE
62 RECORDING A CUE OR LOOK
Step 5. Press [ENTER] to close the dialog box. If you are attempting to record over an existing cue and you have
not selected "Update" as described in [S7] above, you will be presented with the following dialog box.
• Update (see above) is the default. Pressing [ENTER] or [S2] will close this dialog box and update the existing cue,
not losing old cue data.
• Pressing [S1] "Delete and Replace" will delete the existing cue and record the new cue data to this cue number
using the channels specified in [S3] optional above.
• Pressing "Cancel" will close this dialog box and return to the "Record" dialog box.
Step 6. The recorded cue appears on the cue list.
Note on Recording Ranges of Cues:
If you want to record values through a range of cues, enter the range using the X/Y syntax in the [S2] box:
As soon as you type the "/" symbol for Thru, the Label, Cue Timing and Update control become inactive. When
recording through a range of cues, new cues will never be created as this type of recording is necessarily an update
operation. When you press "OK," you will be presented with this dialog box: