Setup guide

Palette

About This Guide 1

LIGHTING CONTROL CONSOLE INSTALLATION & SETUP GUIDE

INTRODUCTION

1. About This Guide

Congratulations on your purchase of a Strand Lighting Palette Lighting Control Console. This guide provides

important information regarding safety, installation, and operation for all console hardware components.

Familiarizing yourself with this information will help you get the most out of your lighting system.

This guide describes the installation and operational procedures for Strand Lighting's Palette series Control Consoles

pertaining to the following models:

• 91801 32/64 presetPalette™ Console

• 91802 48/96 presetPalette™ Console

• 91803 150 classicPalette™ Console

• 91804 250 classicPalette™ Console

• 91805 500 classicPalette™ Console

• 91806 250 subPalette™ Console

• 91807 500 subPalette™ Console

Avoid spilling liquid on the equipment If this should happen, switch the equipment off immediately. To reduce the

risk of fire or electric shock, do not expose the equipment to rain or moisture.

For indoor use only.

This equipment is designed and manufactured to comply with international safety standards IEC950, UL1950, CS950

and is intended for use as part of a lighting control system. It must not be used for other purposes where there is a risk

of safety to persons. The equipment contains power voltages, socket outlets will be installed near the equipment and

be easily accessible.

• Working Voltage/Current: 90 - 240v

• Frequency: 50/60 Hz

• Max Ambient Temp: 35°C

• Do not restrict ventilation

WARNING! It is important to read ALL included safety and installation instructions to avoid damage to the product

and potential injury to yourself or others.

2. Additional Documentation

The console's graphical user interface (GUI) is provided by Horizon Control, Inc. For detailed instructions on using

the PALETTE software, refer to the PALETTE Software Help Menu within the software itself.

For the latest software documentation updates, please visit: www.strandlighting.com

For more information regarding DMX512 systems, refer to the DMX512/1990 Standards publication available from

United States Institute for Theatre Technology, Inc. (USITT).

USITT

6443 Ridings Road

Syracuse, NY 13206-1111 USA

1-800-93USITT