Elo Entuitive Touchmonitor User Guide 1
Elo Entuitive Touchmonitor User Guide 19” LCD Desktop Touchmonitor 1925L Series Revision B P/N 008585 Elo TouchSystems, Inc. 1-800-ELOTOUCH www.elotouch.
Copyright © 2004 Elo TouchSystems Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo TouchSystems. Disclaimer The information in this document is subject to change without notice.
Table of Contents CHAPTER 1 - INTRODUCTION .................................................................................................. 9 Precautions.................................................................................................................................... 7 About the Product.......................................................................................................................... 7 CHAPTER 2 - INSTALLATION AND SETUP .............................................
Using the On-Screen Display (OSD) Menus ............................................................................... 29 Side Bezel Buttons.................................................................................................................. 30 OSD Menu Function – DVI-I Only ........................................................................................ 31 OSD Menu Function – Analog VGA Only.............................................................................
Elo Entuitive Touchmonitor User Guide 6
CHAPTER INTRODUCTION Congratulations on your purchase of an Elo TouchSystems Entuitive touchmonitor. Your new touchmonitor combines the reliable performance of Elo’s touch technology with the latest advances in LCD display design. This combination of features creates a natural flow of information between a user and your touchmonitor. Precautions Follow all warnings, precautions and maintenance as recommended in this user’s manual to maximize the life of your unit.
• Auto adjustment capability in analog mode • High quality full screen re-scaling • Multilingual OSD menus in 11 languages: English, French, German, Spanish, Italian, Swedish, Finnish, Danish, Portuguese, Dutch and Japanese • Serial or USB touch interface (USB requires Windows 98 SE, 2000, Me and XP.
CHAPTER INSTALLATION AND SETUP This chapter discusses how to install your LCD touchmonitor and how to install Elo TouchSystems driver software.
Speaker cable S-video cable Elo Entuitive Touchmonitor User Guide 10 Composite cables
Product Overview Side View Elo Entuitive Touchmonitor User Guide 11
Elo Entuitive Touchmonitor User Guide 12
Touch Interface Connection Figure 2.1 Touchmonitor and Cables Figure 2.
The following table indicates the LED status options for the Touch LED. LED Status On LED Status Off LED Status Blinking Contact Elo Support Contact Elo Support OK Step 1-Routing the Cables • The cables are routed through the cable management channel in the stand.
Step 2-Connecting the Video Cables • Tilt the screen up and back to access the connection ports. • Connect the 15-pin video cable (the ferrite bead end), the 24-pin DVI-D cable, the RCA or the S-Video cable to the video port on your PC. • Connect the other end of the video cable to the video connector on your touchmonitor by routing the cable through the hole in the stand. • Secure the cable to your touchmonitor and PC by turning the screws on the connector clockwise.
Step 3-Connecting the Serial or USB Touchscreen Cable • Connect the female end of the serial (RS-232) cable to the serial port on the back of your PC, or connect the USB touchscreen cable to the USB touchscreen connector on the back of your touchmonitor. • Connect the male end of the cable to the serial touchscreen connector on your touchmonitor, or connect the other end of the USB touchscreen cable to your PC. • Secure the cable to your touchmonitor and PC by turning the screws on the connector.
Step 4-Connecting the Speaker Cable NOTE: The monitor is equipped with both AC and DC power connectors. The monitor is shipped with only an AC power cable. • Depending on where you live, you will use either the European or US/Canadian power cable. • Connect the female end of the power cable to the power port on the touchmonitor. Route the cable through the cable management clip.
NOTE: To protect your equipment against risk of damage from electrical surges in the power line, plug the touchmonitor’s power cord into a surge protector, and then connect the surge protector to a grounded AC electrical outlet.
Tilt Lock Function You are able to lock the monitor in a desired position. • Pivot the monitor to the desired position. • Rotate the knob one full turn clockwise to lock the monitor in position. • Rotate the knob one full turn counter-clockwise to unlock the monitor from its position. Figure 2.
VESA Mount on Your Touchmonitor Figure 2.4 Stand and Display Separation NOTE: The above drawing displays the VESA mounting interface after the removal of the mounting cover and base. NOTE: You will need a 3mm Hex Wrench for the following steps. • Remove the four screws in order to separate the stand from the monitor (see Figure 2.4). • Rotate the monitor 180° (ensuring the monitor will not be upside down when mounted in the position shown). • Reinstall the four screws.
Rear Mount Template Front Mount Template • Remove the two screws holding the front cover to the stand (see Figure 3). • Route the cables through the cutout (if applicable) and mount the monitor to a horizontal surface using the template on page 2-16. • Reassemble the front cover.
Front Mount for Horizontal Surface The following companies provide VESA mounting devices compatible with your touchmonitor: Ergotron 800-888-8458 651-681-7600 www.ergotron.com Innovative Office Products 800-524-2744 610-253-9554 www.innov-office-prod.com GCX 800-228-2555 707-773-1100 www.gcx.com MRI 800-688-2414 www.mediarecovery.
Mounting the Base Elo Entuitive Touchmonitor User Guide 23
Security You can protect your touchmonitor from theft by locking it with a Kensington Lock. See figure 2.5 for details. Figure 2.
Installing the Driver Software Elo TouchSystems provides driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD-ROM for the following operating systems: • • • • • • • Windows XP Windows 2000 Windows Me Windows 98 SE Windows 98 Windows 95 Windows NT 4.0 Additional drivers and driver information for other operating systems are available on the Elo TouchSystems web site at www.elotouch.com. Your Elo touchmonitor is plug-and-play compliant.
Installing the Serial Touch Driver for Windows XP, Windows 1 2000 , Me, 95/98 and NT 4.0 NOTE: For Windows 2000 and NT 4.0 you must have administrator access rights to install the driver. 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the CD and starts the setup program. 2 Follow the directions on the screen to complete the driver setup for your version of Windows.
Installing the Serial Touch Driver for MS-DOS and Windows 3.1 You must have a DOS mouse driver (MOUSE.COM) installed for your mouse if you wish to continue using your mouse along with your touchmonitor in DOS. To install Windows 3.x and MS-DOS from Windows 95/98, follow the directions below: 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. 2 From DOS, type d:\EloDos_W31 to change to the correct directory on the CD-ROM (your CD-ROM drive may be mapped to a different drive letter).
Installing the USB Touch Driver Installing the USB Touch Driver for Windows XP, Windows 2 2000 , Me and 98 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If Windows 98, Windows Me or Windows 2000 starts the Add New Hardware Wizard: 2 Choose Next. Select “Search for the best driver for your device (Recommended)” and choose Next. 3 When a list of search locations is displayed, place a checkmark on “Specify a location” and use Browse to select the \EloUSB directory on the Elo CDROM.
CHAPTER OPERATION About Touchmonitor Adjustments Your touchmonitor will unlikely require adjustment. Variations in video output and application may require adjustments to your touchmonitor to optimize the quality of the display. For best performance, your touchmonitor should be operating in native resolution, that is 1280 x 1024 at 60-75 Hz. Use the Display control panel in Windows to choose 1280 x 1024 resolution. Operating in other resolutions will degrade video performance.
Side Bezel Buttons MENU 1 2 Control Function Menu Display or exit the OSD menus. Up/Toggle 1. Shortcut to speaker mute. 2. Increase value of adjustment items. 3. With menu on, toggles OSD options. Down/Toggle 1. Shortcut to input select. 2. Decrease value of the adjustment items. 3. With menu on, toggles OSD options. SELECT 4 Enter Select item 1. Shortcut to Auto Adjust in VGA mode only. 2. Select- To select the adjustment items from the OSD menus.
OSD Menu Function – Analog VGA Only Brightness Controls the brightness Auto Adjust Contrast Controls the picture contrast OSD Language Color Adjust Controls the screen color. H-V Position Miscellaneous Provides access to miscellaneous settings. Clock Phase Audio Adjusts audio volume, bass, treble and sound off. Source Elo Entuitive Touchmonitor User Guide 31 Automatically selects the optional settings for image parameters (brightness, contrast, image position, phase, etc.
OSD Menu Function – DVI-I Only Brightness Controls the brightness OSD Language Contrast Controls the picture contrast Audio Adjusts audio volume, bass, treble and sound off. Miscellaneous Provides access to miscellaneous settings. Source Elo Entuitive Touchmonitor User Guide 32 Selection of the OSD menu language: English, French, German, Spanish, Swedish, Finnish, Danish, Portuguese, Dutch and Japanese, Italian, and Polish. Toggle video source from Analog RGB, Digital, 3-video and composite video.
CHAPTER TROUBLESHOOTING If you are experiencing trouble with your touchmonitor, refer to the following table. If the problem persists, please contact your local dealer or our service center. Solutions to Common Problems Problem No image appears on screen. “Out of Range” display Image has vertical flickering line bars. Suggestion(s) Check that all the I/O and power connectors are properly connected as described in Chapter 2. Make sure the pins of the connectors are not crooked or broken.
Image is unstable and flickering Image is scrolling Touch doesn’t work Use “CLOCK” to make an adjustment. Make sure the VGA signal cable (or adapter) is well connected. Check and reconfigure the display mode of the vertical refresh rate of your graphic card to make it compatible with the LCD display. Make sure cable is securely attached at both ends.
APPENDIX NATIVE RESOLUTION The native resolution of a monitor is the resolution level at which the LCD panel is designed to perform best. For the Elo LCD touchmonitor, the native resolution is 1280 x 1024 for the SXGA-19 inch size. In almost all cases, screen images look best when viewed at their native resolution. You can lower the resolution setting of a monitor but not increase it.
correspondence between video pixels and LCD pixels using algorithms contained on its controller. The accuracy of the algorithms determines the fidelity of conversion of video pixels to LCD pixels. Poor fidelity conversion can result in artifacts in the LCD displayed image such as varying width characters.
APPENDIX TOUCHMONITOR SAFETY This manual contains information that is important for the proper setup and maintenance of your touchmonitor. Before setting up and powering on your new touchmonitor, read through this manual, especially Chapter 2 (Installation), and Chapter 3 (Operation). 1 To reduce the risk of electric shock, follow all safety notices and never open the touchmonitor case. 2 Turn off the product before cleaning 3 Your new touchmonitor is equipped with a 3-wire, grounding power cord.
Care and Handling of Your Touchmonitor The following tips will help keep your Elo Entuitive touchmonitor functioning at the optimal level. • • • • • • To avoid risk of electric shock, do not disassemble the brick supply or display unit cabinet. The unit is not user serviceable. Remember to unplug the display unit from the power outlet before cleaning. Do not use alcohol (methyl, ethyl or isopropyl) or any strong dissolvent. Do not use thinner or benzene, abrasive cleaners or compressed air.
APPENDIX TECHNICAL SPECIFICATIONS Compatible Video Modes Your Elo Entuitive touchmonitor is compatible with the following standard video modes: Mode Resolution H. Frequency (kHz) V. Frequency (Hz) IBM & VESA VGA 640 x 350 31.47 70.09 IBM & VESA VGA 640 x 400 31.47 70.09 IBM & VESA VGA 720 x 400 31.47 70.09 IBM & VESA VGA 640 x 480 31.47 59.94 IBM & VESA VGA 640 x 480 37.86 72.81 IBM & VESA VGA 640 x 480 37.50 75.00 VESA SVGA 800 x 600 35.16 56.25 VESA SVGA 800 x 600 37.
VESA SXGA VESA SXGA VESA SXGA 1280x960 1280x 1024 1280x 1024 60 64 80 Elo Entuitive Touchmonitor User Guide 40 60 60 75
Touchmonitor Specifications Elo Entuitive Touchmonitor User Guide 41
Elo Entuitive Touchmonitor User Guide 42
Elo Entuitive Touchmonitor User Guide 43
19 « LCD Touchmonitor (ET192XL-XXWA-1) Dimensions Elo Entuitive Touchmonitor User Guide 44
Elo Entuitive Touchmonitor User Guide 45
Aft tilt 90˚ from vertical Elo Entuitive Touchmonitor User Guide 46
REGULATORY INFORMATION I. Electrical Safety Information: A) Compliance is required with respect to the voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified herein will likely result in improper operation, damage to the equipment or pose a fire hazard if the limitations are not followed. B) There are no operator serviceable parts inside this equipment.
iii) Reorient the affected receiver’s antenna. iv) Plug the digital device into a different AC outlet so the digital device and the receiver are on different branch circuits. v) Disconnect and remove any I/O cables that the digital device does not use. (Unterminated I/O cables are a potential source of high RF emission levels.) vi) Plug the digital device into only a grounded outlet receptacle. Do not use AC adapter plugs.
WARRANTY Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. The warranty for the touchmonitors and components of the product is 1 year. Seller makes no warranty regarding the model life of components. Seller’s suppliers may at any time and from time to time make changes in the components delivered as Products or components.
Elo Entuitive Touchmonitor User Guide 50
