User guide

Customer panel material:
1. Wood: ?4.5mm holes thru for M4 screws w/nuts, or no thru holes, screws for wood 4mm.
2. Sheet metal: concealed head threaded studs M4 w/nuts.
IMPORTANT!
The wall mounting instructions are for us by the qualified wall mounting person only!
Note
You will need a screwdriver to attach the L-brackets.
Your kiosk touchmonitor included two L-brackets (and four screws, M4x6).
This equipment is intended to be mounted in accordance with the proper hardware and the installa-
tion instructions supplied with the product. Use of mounting brackets or screws other than those
specified in the installation instructions may introduce a hazard.
Monitor Mounting
2-15