Specifications

E271-2200 and E271-2210 Controllers 123
Environmental
Temperature
Operating: 0°C to 70°C. (Verified for E271-2200 only.)
Storage: -25°C to 85°C.
Humidity
Operating: 10% to 90% RH, non-condensing (not verified).
Storage: Same.
Physical Characteristics
Construction
Four-layer surface-mount design features CMOS circuitry, custom ASICs, full
power and ground planes, analog input filters, bipolar transistors, and output stage
protection. Substrate is 0.062" rated UL 94 V-0.
Dimensions
E271-2200 See Figure 2-2, page 10.
E271-2210 See Figure 2-3, page 12.
Component side maximum height 0.337". Solder side maximum height 0.100".
Allow at least 0.5" on connector side for mating connectors.
Mounting Hole Dimensions
E271-2200 See Figure 2-2, page 10. All mounting holes are plated through-
holes (PTH).
E271-2210 See Figure 2-3, page 12. Two mounting holes are PTH.
Connectors and Pin Definitions
Serial Input/Output Connector
5-position double row 0.025" square pin header on 0.100" centers, Du Pont (Berg)
#65626-10. DCE Configuration. Acceptable mating receptacle connectors: Molex
series 40312 or 70121. See Serial Connections, page 27, for details.