Specifications

6 Chapter 1 - Introduction
ABOUT THIS MANUAL
This manual provides technical information on the Elo SmartSet controller family.
Details are given in this manual on the features, configurations, connections, and
specifications of the SmartSet controllers.
This manual also includes examples of writing a software interface, such as a
device driver, for the controller. Elo supplies such a driver, called ELODEVTM,
for the IBM PC and PS/2 family of computers and compatibles that use the MS-
DOS operating system. Elo also supplies mouse emulation with its
MonitorMouse
®
family of drivers for DOS, Microsoft Windows, OS/2, and
Macintosh platforms. Other third-party drivers and interfaces are also available.
Contact Elo for details.
A SmartSet Companion Disk is included with this manual which contains the
sample driver source code and the SmartSet software setup utility, both described
in this manual. See the !READ.ME! file, if present, for any changes or additions to
this manual.
The rest of this manual is organized as follows:
Chapter 2 Explains how to set up the controllers with jumpers.
Chapter 3 Details the controller connections and installation procedures.
Chapter 4 Gives a tutorial on the important operating characteristics of the
SmartSet controller interface using the SmartSet software setup
utility.
Chapter 5 Describes the communication protocol with the controllers and
provides the information you'll need for writing a software
interface. Example C code is included.
Chapter 6 Provides a command reference for the SmartSet controller software
interface.
Appendix A Details optional data output formats and emulation modes.
Appendix B Gives algorithms for coordinate scaling.
Appendix C Lists controller specifications.
For more information on the AccuTouch product line, including touchscreen and
controller options, installation, and troubleshooting, see the AccuTouch Product
Manual.