Specifications

7
22
Controller Jumper Settings
• General Information 7
• E271-2200 Serial Controller 10
• E271-2210 Serial Controller 12
• E271-2201 PC-Bus Controller 17
• E271-2202 Micro Channel Controller 22
GENERAL INFORMATION
SmartSet controllers are shipped preconfigured for use with the Elo ELODEV and
MonitorMouse driver software. For most users, no changes are necessary.
Required jumper settings and options available for your controller are listed in the
ELODEV Installation Guide and Programmer's Reference Manual (version 1.5),
MonitorMouse for OS/2 User's Guide (version 2.0), or the MonitorMouse for
Macintosh User's Guide (serial controllers only). If your software does not use Elo
drivers, check your third-party documentation for required jumper settings.
The E271-2200, E271-2210, and E271-2201 controllers can also be jumpered to
emulate other Elo controllers. See the corresponding sections in this chapter for
details.
If you are writing your own driver software, the information in this chapter will
detail all options available through jumpers. The SmartSet controllers can also be
configured through software setup. Jumpers can easily be used to select the