Specifications

Sample SMARTSET Session 39
points), or combinations of these. Touch coordinates may
be trimmed and scaled to specified ranges.
Touch Reporting Used to select various touch reporting options, touch
packet emulation, and low power mode.
Calibration A touchscreen calibration sequence may be performed, or
calibration points specified manually. X and Y axes may be
swapped.
Scaling Touch coordinate scaling ranges can be specified with any
axis inversion.
Timer Lets you select and configure the on-board timer features of
the controller.
Filter Allows you to select low-level filtering parameters for
optimizing controller performance for extreme
environments.
Touch Testing Allows you to test the touchscreen and see the data
transmitted by the controller.
Diagnostics Runs the various on-board diagnostic routines.
Reset Controller Performs a soft or hard reset on the controller.
ASCII Setup Lets you communicate directly with the controller by
entering command packets with the keyboard. By manually
communicating with the controller and studying its
responses, you can learn the details of the host-controller
interaction.
Exit Exits the SMARTSET program.
SAMPLE SMARTSET SESSION
We will now proceed to configure some basic operating parameters of the
SmartSet controller. The SMARTSET program will be used to change settings
and examine their effects. Press [F1] for on-line information for each command, or
refer to Chapter 6 for detailed information.