Specifications

Command Descriptions 81
'1' '1' E271-140 ASCII (Appends 'T' or 'U') 117
'1' '2' E261-280 Binary (81h flags untouch)* 122
'1' '3' E261-280 ASCII (Appends 'T' or 'U')* 121
'1' '4' E271-2200 Binary (same as '04') 51
'1' '5' E271-2200 ASCII (Appends 'T' or 'U') 116
'1' '6' E281A-4002 Binary (Z=0 on untouch) 117
'1' '7' E281A-4002 ASCII (Z=0 on untouch) 118
Partial Emulation is disabled by factory default (TouchFlag = '1', Format = '4').
* These formats force the axes scaling to be set from 2 255 to emulate the E261-
280 controller's protocol. Any scaling currently in use will be lost if one of these
formats is selected. Scaling Mode is also enabled automatically.