User guide

REGULATORY INFORMATION
I. Electrical Safety Information:
A) Compliance is required with respect to the voltage,
frequency, and current requirements indicated on the
manufacturer’s label. Connection to a different power source
than those specified herein will likely result in improper
operation, damage to the equipment or pose a fire hazard if
the limitations are not followed.
B) There are no operator serviceable parts inside this
equipment. There are hazardous voltages generated by this
equipment which constitute a safety hazard. Service should
be provided only by a qualified service technician.
C) This equipment is provided with a detachable power cord
which has an integral safety ground wire intended for
connection to a grounded safety outlet.
1) Do not substitute the cord with other than the provided
approved type. Under no circumstances use an adapter
plug to connect to a 2-wire outlet as this will defeat the
continuity of the grounding wire.
2) The equipment requires the use of the ground wire as a
part of the safety certification. Modification or misuse
can provide a shock hazard that can result in serious
injury or death.
3) Contact a qualified electrician or the manufacturer if
there are questions about the installation prior to
connecting the equipment to mains power.
II. Emissions and Immunity Information
A) Notice to Users in the United States: This equipment has
been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of FCC Rules. These
limits are designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency
energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
B) Notice to Users in Canada: This equipment complies with
the Class B limits for radio noise emissions from digital
apparatus as established by the Radio Interference
Regulations of Industrie Canada.
C) Notice to Users in the European Union: Use only the
provided power cords and interconnecting cabling provided
with the equipment. Substitution of provided cords and