User`s guide

CARROLL TOUCH Appendix A - Error Messages
Touch System Diagnostics (CTDIAG) User’s Guide A-5
Message: HBC TAPI Driver Not Found at S/W
Interrupt xx H
Meaning: CTDIAG cannot find the HBC TAPI driver at the
indicated software interrupt.
Action: Install the proper TAPI driver at the desired software
interrupt. Otherwise, select the proper controller
interface method and/or software interrupt using the
CTDIAG menus.
Message: Invalid Comm Port
Meaning: CTDIAG could not detect the specified comm port in
the Comm Port menu.
Action: Select a valid comm port.
Message: Invalid command line parameters...
(followed by a list of valid command line parameters)
Meaning: An incorrect command line parameter was encountered
when loading CTDIAG.
Action: Enter the correct command line parameters as indicated
by the error printout.
Message: Invalid Report Packet Received -
Report Type
Meaning: The expected report was not received.
Action: Select Debug from the Test Menu and examine the
Trace history to determine more about the condition.
Message: Invalid Report Received -
Configuration Report
Meaning: This error occurs during a request for System
Information. A report was not received after issuing a
Get_Configuration_Report
command.
Action: Select Debug from the Test Menu and examine the
Trace history to determine more about the condition.
Table A-1. Error Messages (Continued)