User's Manual

UM600694 Rev B page 23 of 73
User Manual –I-Series 4.0 Backpack
Disconnecting a connected Wireless Network
• Tap setting of the connected device.
• Tap (FORGET) icon to disconnect.
Ethernet
Note: To connect the I-Series 4.0 to Ethernet, When available, the I-Series 4.0 will automatically prioritize the ethernet connection. If the I-Series
4.0 does not, please follow the steps below.
• Set Ethernet to disable.
• Go to Wi-Fi settings, tap Use Ethernet to disable .
• Tap Ethernet.
Airplane mode
This will disable all of the wireless transmission functions. Including cellular, Wi-Fi, and Bluetooth.
• To enable , tap Airplane mode.
Hotspot & tethering
Wi-Fi hotspot
This feature is for sharing Internet network connection with another device using Wi-Fi.
Note: The I-Series 4.0 must be connected to Wi-Fi. See Network & Internet connection on this user manual.
• Tap Hotspot and tethering.
• Tap Wi-Fi hotspot.
• Tap toggle switch to ON .
• Tap QR code.
• The QR code is for another device to scan the password for easy connect.
• To enter manually the password, tap Hotspot password.
USB tethering
This feature is for sharing Internet connection to another device using a USB cable.
Note: The USB cable must be connected first from I-Series 4.0 to another device or PC. See Connected device → USB on this user
manual.
• Tap Hotspot and tethering.
• Tap USB tethering, to enable .
Bluetooth tethering