Installation Manual

Image input
It is recommended to take photos and record them in the indoor
environment to ensure that the light intensity in the indoor
environment is appropriate. When inputting, the staff should
stand with the light, the expression is natural, the hair does not
cover the eyes and eyebrows. For those who wear glasses,
the glasses frame shall not cover the eyes, and the lenses shall
not reflect light or change color. It is recommended to take off
glasses and enter photos, and the top light source shall not
cause over light or shadow on the face.。
I n s t a l l a t i o n
m a n u a l
Add：No. 208, Multipurpose BD, Tsinghua InformTech
Tel：[phone] Tax : 0755-26014824
emails：[e-mail] Http : //www.eloam.cn
SHENZHEN ELOAM TECHNOLOGY CO.,LTD
4 0 0 - 0 9 8 2 - 8 5 8
Hotline:
微 信 公 众 号
Service And Statement
After-sale Service and Guarantee.
1. We warrants the included hardware product and accessories against
defects in materials and workmanship for one year from the date you
purchase.
2. We will provide on-line trouble shooting service after receiving
your claim in 24 hrs.
3. We provides technical support at any time when you needed.
Additional cost may will be charged if you want us to make customized
software or package.
4. We do not warrant against normal wear and tear, nor damage caused
by accident or abuse.
5. We do not warrant in the following situation.
5.1 Damaged by force majeure, such as all kind of earthquake
, storm flooding etc.
5.2 Damage caused by improper operation.
5.3 The visualizer don't have original warranty card or serial No.
5.4 Fault caused by computer virus.
Problems caused by other software’s installation and setting
Service&Statement
Packing
（1）Device
（2）Power adapter
（3）Mat
（4）Screw
（5）screw
（6）Manual
（7）Certificate
（8）Access gates(Optional)
First, after the equipment is installed and fixed
on the site, it can be started for 15 minutes
continuously. If temperature deviation is found,
it can be calibrated as follows:
(1) Fix the machine in a fixed position and angle;
(2) Get an accurate forehead temperature gun
and measure a person's forehead temperature;
(3) The person stands at the fixed 0.5m position of the machine for temperature
measurement. If the measured temperature is too high, the temperature
compensation value will increase. If it is too small, the compensation value will be
set a little smaller (the calibration time generally takes 10 seconds to measure the
temperature of the calibrator);
(4) Within 15 minutes after the temperature measuring plate is turned on,
the measured temperature will be on the high side, which is a normal phenomenon.
The infrared thermal imaging module must be preheated for 15 minutes to measure
the temperature normally.
OS Linux
CORE
CPU ARM Cortex-A7，max 1GHz
NPU network accelator NPU，1.2T calculation
STORAGE run memory 512MB ,storage 8GB
Display TFT LCD，8 inch，resolution：800X1280
Face recognition live detetion ，200W wide dynamic
Infrared
Range 30~45°
Distance0.5~1M
number 10000~100000人
time 1S
Angle 33°
Internet
Wired，Ethenet 100M
Human induction Support
Fill in light White
Indicator light Green：verify pass，Red：verify failed
Interface
USB*1，RJ45*1，wiegand IN*1，wiegand OUT*1，
RS485*1，DC 12V*1
Devi c e upgrate Support
Assembly Gate Installation, Wall Mounted
Application Indoor（no sunlight intererence）
Dimension
Vertical：139×95×415mm
Wall Mounted：139×26×274mm
Case Material Aluminum alloy
Spec &key features
hat glass
rkness latral face
image request：
1. image need below
backgroud
front face
normal face
Moderate face
light
-7- -8- -9- -10 -
WiFi
Correction method of infrared temperature measurement
Industrial Park, Nanshan District, Shenzhen,China
Face Recognition
Infrared Temperature
Measurement