Installation Manual
Fill light
infrared temperature measurement
Binocular camera face recognition
infrared fill light
LCD display
power
USB
Adjust
Relay output
Network
update
Six interface in one cable
NO
NC
COM
1
2
3
-1-
Relay output interface：
NO：normal open
NC：normal close
COM：common
Debug interface, Upgrade interface：
Please operate under the guidance of the manufacturer,
users should not debug and upgrade the equipment by themselves
Wall Mounted
The installation needs to consider the factors,such as :the height of
the users and the environment,and choose the right location.
recommended the height of ：
0.5m
installation is 1.5m,recognition distance is 0.5-1m.
o
33
1.5m
Product Appearance
0.4~0.6m
Access gates
o
33
1.48m
When the gate machine is equipped with a card(ID card / IC card) reader
module, the installation hole of the face recognition terminal device should
consider the height of the gate machine, as far as possible away from
the card reader module, and the interval of 0.4m or more is recommended
to ensure that the capture of face is clear and complete when swiping
the card.
Before installation, please consider the factors such as the height of
the personel and the environment, select the appropriate installation point.
The reference point of the gate machine installation is 15 cm forward from
the center of the gate machine. As the picture shows:
Swipe module installation distance
hole diameter 3.4cm
Installation
-2- -3-
Any object will emit infrared radiation energy, and it’s surface
temperature directly determines the radiation energy size and wavelength.
Based on this principle,this product adopts the infrared sensor
whi c h i s used for detecting the infrared radiation energy released
by human body , and measures the temperature through calculation and
compensation.
infrared temperature measurement Priciple
Usage method
Temperature measurement method
(1) The device is connected to the power supply and can be used
normally after 15 minute;
(2) When the user's temperature is detected, please aim your forehead
at the temperature detection area, as shown below:
System settings
(1) Connected with the power and enter the main interface after
initialization;
(1)I nsert the mouse, click the blue box at the bottom of the main interface
of the system for 3 times, p opup administrator login., After entering
the user name and password, click "log in" to enter "system Settings".
The default user name of the system is: root, and the default
password of the system is: 123456
Device setting
(1) Identify settingcan set the threshold value, choose whether
living detection, mask recognition, temperature screening,
and temperature compensation value;
FACE AI
08:09:02
2020-04-02 Saturday
o
normal ，36.7 C
(2) Visitor management:add and import visitor
in batch, search for certain visitor;
(3) Record management: search and export data;
(4) Network settings: wired network and wireless network settings;
(5) Server setting: set server address;
(6) System settings: Set volume, screen brightness, fill light settings,
system information, system time settings, restore factory settings and
modify administrator passwords.
Identification settings
(1) Set the threshold: the default setting is 0.50, the higher the setting
value, the more accurate the similarity between the face to be
recognized and saved face image;
(2) Living body detection: After checking, it is detected whether it is
a living body;
(3) Mask recognition: After checking, check whether to wear a mask;
(4) Body temperature screening: after checking, only body temperature
screening is performed, and the gate is opened when the body
temperature is normal;
(5) Temperature compensation: the parameters adjusted for body
temperature detection, the range is B0-1000, and the parameters
should be fine-tuned in different environments.
Visitor management
a. Use under offline mode without network, and perform corresponding
operations on the device:
(1) Add visitor: Select [Add visitor] T [Take a picture] T [Name] to save,
after proceeding successfully, the corresponding person name will be
displayed when the face recognition is passed;
(2) Batch import: Please use U disk for batch import operation;
Organize the personnel information photos into a folder, and then use the
"picture pre-processing tool" to generate a file that can be imported in batches.
The file name defaults to: "REG", and then copy the "REG" folder to the root
directory of the U disk The U disk is successfully connected to the USB interface
of the device, select [Personnel Management]-[Batch Import], and click OK.
[1] At present, the U disk format recognized by the device only supports FAT32
[2] Download address of image preprocessing tool:
https: //box.lenovo.eom/l/mu2H9b
Graphic processing processor M-64-2O191123.rar
(3) Search visitor: Enter the visitor ’s name, and click to query, or you
can click directly without entering the name to delete the searched data.
b. When the device is connected to the network, the data is stored in the cloud,
and batch import operations can be performed on the cloud:
Users can access the e-channel access control platform:
https://sac.eloam.net, enter the account number and password of the system user
perform related operations after successful login. https://box.lenovo.com/l/mu2H9b：
-5- -6--4-
Records management
a. Use in offline mode without network, and perform corresponding
operations on the device side:
(1) Search records: you can search for a certain visitor's touching record for
a certain time; when you select to reject the record, you can only query
the touching records of local registered visitor;
(2) Export records: You can export a person's touching record for
a certain time; when exporting data, connect the U disk first, and the exported
file is in the RECG folder under the root directory of the U disk;
when you select the check reject record, only It can export the touching
records of local registered visitor.
b. When the device is connected to the network, the data is stored in the cloud
, and the record management operation can be performed in the cloud:
The user can access the e-channel access control platform
: https://sac.eloam.net, enter the system user account and password,
and log in successfully for related operating.
"* Offline mode is used, all data entered by the device is stored in device,
and can be imported and exported by the istu disk. After the network is
available, the data entered by the setting end does not support uploading
to the cloud. * Use the network mode, please directly in the cloud For
the visitor l input operation, there is no need to use a U disk to import
and export separately. The data is automatically uploaded and downloaded.
, Staff entry, record export,
Network settings
(1) Wired network settings: you can choose to automatically obtain IP and
manually set the IP;
Obtain IP automatically: Check the wired network and set automatically.
Set IP manually: Check the wired network and set manually
(2) Wireless network settings: You can choose wireless WiFi and network
hotspot.
Server settings
(1) Server address: https://sac.eloam.net/api
(2) Polling: The interval time for the device to request the background server.
System settings
(1) Volume setting: the system volume can be adjusted;
(2) Screen brightness: Adjustable system screen brightness;
(3) Fill light setting: automatic fill light can be selected, fill light normally
open or normally closed;
(4) Restore factory settings: all settings, personnel information and
identification records will be deleted;
(5) Administrator password: the administrator password can be modified;
(6) System information: you can view the corresponding device model,
firmware version number, SN number and address
(7) System time setting: manually modify the time.
-6-
This equipment should be installed and operated with
minimum distance 20cm between the radiator&your body.