Instruction Manual

Instruction manual I ELOshield
Rev. 20 09.03.2020 Page 14 of 85
Optionally:
 1x USB cable for stationary zone configuration. One is sufficient for the entire system.
 1x configuration software including the license to use. One is sufficient for the entire system.
 Stationary antenna modules (A) to create the zones detecting persons and vehicles equipped
with vehicle modules (max. 4),
 Stationary antenna modules (B) which may be detected by vehicles equipped with vehicle
antenna module(s) (A) (max.4)
 Additional stationary module to antenna module (A/B) cables (4 m or 15 m) and antenna module
(A/B) to antenna module (A/B) cables (4 m or 30 m)
 Visual and acoustic signal column
Figure 2. Basic stationary set with optional visual and acoustic signaling
4.3 Pedestrian set
 1x pedestrian module
 1x charger
 1x micro-USB cable for device charging and configuring