Instruction Manual

Instruction manual I ELOshield
Rev. 20 09.03.2020 Page 18 of 85
5.2 Q button
 When pressed – the device is switched on (if switched off), auto-test is completed or the
driver’s muting mode activating. The driver’s muting mode may be switched on, when the
pedestrian module is within the muting zone reach. The muting zone is configured from the
application level in vehicle module.
 When pressed and held for 2 seconds – activate/deactivate the acknowledge mode.
 When pressed and held for 5 seconds – power off (signaled with vibrations)
5.3 Warning and informing the operator
Figure 4. Pedestrian module
The pedestrian module warns and informs the user by means of:
 Red alarm LED for zone 1
 Yellow warning LED for zone 2
 Acoustic signals
 Vibration signals
 Status LED
 Battery LED
Battery LED (when charging):
 Continuous yellow – battery charging in progress
 Continuous green – battery fully charged
 Off – charging error (check the charger/battery)