Instruction Manual

Instruction manual I ELOshield
Rev. 20 09.03.2020 Page 22 of 85
Battery LED (during normal operation of the device without the charger connected):
 Off – battery fully discharged or fully charged (if the status LED blinks)
 Blinking yellow - battery discharged in 70%
 Blinking red – battery discharged in 85%
 Continuous red – battery discharged - device will be switched off
Status LED
 Off – the pedestrian module is switched off
 Blinking green – the pedestrian module is active
 Blinking yellow - the acknowledge mode is active
 Blinking red – the auto-test is active
 Continuous red – pedestrian module failure or not configured
Acoustic and vibration signals
 The alarm/warning mode – the frequency and level may be configured from the application
level.
 3 short signals every 5 seconds – Low battery level, less than an hour to be completely
discharged.
 Continuous signal for 10 seconds – the device is discharged, automatic switching off.
 Continuous signal when the Q button is pressed and held – the device is switched off; the
button may be released.