Instruction Manual

Instruction manual I ELOshield
Rev. 20 09.03.2020 Page 32 of 85
Without jumper Vehicle antenna module (A) Vehicle antenna module (B) – will be
seen as vehicle object by stationary
antenna modules (A) and vehicle
antenna modules (A)
With jumper Stationary antenna module (A) Stationary antenna module (B) – will
be seen as stationary object by
vehicle antenna modules (A) and
stationary antenna modules (A)
6.5.4 Vehicle module
The vehicle module should be installed in a visible and safe place in the cab using mounting brackets.
The Q button should be easily accessible.
6.6 Electrical installation
CAUTION
Beware of electrical voltage and heat!
Touching live parts can result in injuries. Also, a short circuit can occur which
causes components to be heated. This can lead to injuries.
 The power supply must be disconnected when working on electrical
components.
 Metal objects such as rings or watched must be removed beforehand.
 Connection, testing and measuring work on electrical parts may only be
carried out by a qualified electrician.
 If the electrical parts are faulty or damaged, turn off the electrical power
supply immediately and initiate repair.