Instruction Manual

Instruction manual I ELOshield
Rev. 20 09.03.2020 Page 55 of 85
Configurable settings for the vehicle/stationary module:
Device settings tab
o Machine ID
For the vehicle/stationary module: Machine ID 1 to 253
 Important: Each vehicle/stationary
module present in the plant must have a
different machine ID.
o Zone 1 (alarm) radius – the first zone radius expressed in centimeters (min. 100 cm,
max. 2,500 cm)
o Zone 2 (warning) radius – the second zone radius expressed in centimeters (min.
zone 1 radius, max. 2,500 cm)
o Driver’s muting zone – the driver’s muting zone radius expressed in centimeters
For the panel with the stationary module:
min. 0 cm, max. 0 cm
For other configurations:
min. 0 cm, max. Zone 1 radius
Driver's muting zone is to prevent ELOshield vehicle set
from being triggered by the driver's pedestrian module.
Once the operator enters the vehicle, he should press Q
button on his pedestrian module to switch it to the
driver's muting mode. From this moment on, driver's
pedestrian module becomes invisible to other vehicles. If
the operator exits his vehicle and moves outside the driver's muting distance, his
pedestrian module returns to normal operation automatically.