Instruction Manual
Instruction manual I ELOshield
Rev. 20 09.03.2020 Page 58 of 85
Settings of the antenna modules (A and B) connected to the stationary/vehicle module –
the list of configurable modules:
o Module ID
For the pedestrian module and antenna module (B): Module ID 0 to 499
For the antenna module (A): Module ID 10000 to 10253
Important: Each module present in the fleet must have a different module
ID.
o Zone buffers (does not apply to the antenna modules (A)) – this is the additional
distance, which adds to existing zones radiuses, in order to increase the detection
range for selected devices (eg. new employees or visitors)
o Height of antenna modules (A/B) installation above the ground – this parameter
should be set, when the vehicle antenna modules (A) operate at a different height
than the stationary antenna modules (B).
Example:
(a vehicle module) + (a pedestrian module) = (distance)
Zone 1 radius: 700 cm
+ Zone 1 buffer: 100 cm
= Zone 1: 800 cm
Zone 2 radius: 1,300 cm
+ Zone 2 buffer: 200 cm
= Zone 2: 1,500 cm