Instruction Manual

Instruction manual I ELOshield
Rev. 20 09.03.2020 Page 6 of 85
NOTICE
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and
receiver.
- Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV
technician for help.
1.1 Risk assessment
The users vigilance may be limited as they become used to being warned by ELOshield. It may result
in hazardous situations for the people and machinery. In order to minimize the risk of such hazards,
the following guidelines must be observed:
 The ELOshield users must be repeatedly informed about potential technical failures of
ELOshield.
 The system users must be fully familiar with the system operation and aware of consequences
of activating special operating modes of the devices.
WARNING
Prior to the commencement of work, each operator
(pedestrian, truck and station) must make sure that
ELOshield operates correctly by checking its correct
functionality – a test interaction of each ELOshield
module and combination of modules must be evoked in
order to trigger an alarm.