Quick Start Guide

ManualsBrandsELOVEN ManualsAudio EquipmentBluetooth Headphones

QUICK START GUIDE

Package contents:

 Earbuds(L/R)

 Charging CASE

 Quick start guide

 Wing tip(S/L)

Charging the battery

When you charge the battery for the first time or when the battery is completely discharged, it

needs at least 10 min to start to work.

1. Insert the earbuds in the charging case.

2. Close the charging case and connect the USB cable. The batteries of the earbuds and the

charging case are charged simultaneously.

Note:

 Use only approved chargers.

 Keep the charging case closed while you store or charge the earbuds, or when you charge

the charging case.

 If you touch the charging contacts while charging the charging case, it may affect charging.

 If there is a sweat or liquid on the charging contacts, corrosion may occur on the earbuds.

When there is sweat or liquid on the charging contacts or earbuds, clean them before

inserting the earbuds in the charging case.

 Do not put the wing tips on the earbuds in the wrong direction. The earbuds will not be

charged if they are not properly inserted into the charging case.

Connecting the earbuds to a mobile device

You can listen to music or answer incoming calls wireless after the earbuds connect to a mobile

device.

1. Insert the earbuds in the charging case, then close the charging case and open it.

2. On your mobile device, tap connect on the pop-up window and follow the on-screen

instructions to complete the connection.

3. Put the earbuds into your ears and use them.

Note: If the earbuds do not connect to the mobile device within 3 min, Bluetooth pairing mode

will be derivative. Close the charging case again and open it. The earbuds will enter Bluetooth

pairing mode.

Summary of content (4 pages)

PAGE 1
QUICK START GUIDE Package contents:  Earbuds(L/R)  Charging CASE  Quick start guide  Wing tip(S/L) Charging the battery When you charge the battery for the first time or when the battery is completely discharged, it needs at least 10 min to start to work. 1. Insert the earbuds in the charging case. 2. Close the charging case and connect the USB cable. The batteries of the earbuds and the charging case are charged simultaneously. Note:  Use only approved chargers.
PAGE 2
Wearing the earbuds Adjust the earbuds to fit your ears. 1. Hold the upper and lower sides of each earbuds and remove them from the charging case. 2. Check the direction of each earbuds and point their lower halves(speakers)in the direction of the lower part of your ear. 3. Place the lower and upper halves into the corresponding parts of your ears, and then adjust the earbuds so they fit. Note: If the earbuds are not positioned correctly in your ears, they may not work.
PAGE 3
 Do not allow children or animals to chew or suck the device.  The device can be used in locations with an ambient temperature of 0- 35℃. You can store the device at an ambient temperature of -30℃ to -50℃. Using or storing the device outside of the recommended temperature ranges may damage the device or reduce the battery’s lifespan. Do not use your device in a hot environment or near fire. Comply with all safety warnings and regulations regarding mobile device usage while operating a vehicle.
PAGE 4
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.