User manual

905U-G Wireless Gateway User Manual
Page 49 ©September 2004
Any I/O registers that have already been selected will have a color shading.
The update times, analog sensitivities for these mappings can be set as per normal I/O
mappings.
To map several inputs to consecutive I/O registers, use “Shift”-select or “Ctrl” - select to
highlight the inputs, and select the first I/O register in the range. The selected mappings will
be entered with consecutive I/O registers.
For each “remote input” configured to a 905G, there is a comms-fail time parameter in the
905G. If the 905G does not receive a message destined to that I/O register within the
“comms fail” time, then the “comms fail” status for that I/O register will be set - the most
significant bit of the status register will be set to 1. The comms fail time should be more
than the corresponding update time at the remote input.