User's Manual

Elpro Technologies E2-450 Radio Module Instruction Manual
Rev Version 1.0 www.cooperbussmann.com/wirelessresources 5
CHAPTER 1 - INTRODUCTION
The E2-450 is a radio modem module that will be used as a base radio for a number of Elpro wireless products in the
future. It will be primarily used to act as a wireless network adapter for transfer of 802.11 data frames over lower
speed wireless links. The E2-450 consists of a radio microcontroller and a host microcontroller, an RF transceiver
section, and a power supply section.
CHAPTER 2 - Module Description
2.0 Main Host Interface
The main host interface is delivered through a 20 pin standard right angle pin header connector indicated in the
picture above. The pin description will be described in chapter 4. This interface provides power supply to the module.
This interface also provides a serial interface to the module where data can be supplied to be transmitted and
received through.
Alternate Host
Interface
Production Interfaces
Production Interfaces
Main Host
Interface
Grounded Mounting
Holes