User's Manual

Page 2 E2 Wireless I/O
Thank you for your selection of the E2 Modem. We trust it will give you many years of
valuable service.
ATTENTION!
Incorrect termination of supply wires may cause internal damage and will void warranty. To
ensure your E2 module enjoys a long life, double check ALL your connections with the user
manual before turning the power on.
CAUTION:
To comply with FCC RF Exposure requirements in section 1.1310 of the FCC Rules,
antennas used with this device must be installed to provide a separation distance of at
least 20 cm from all persons to satisfy RF exposure compliance.
All equipment must be properly grounded for safe operations. All equipment should be
serviced only by a qualified technician
Do Not:
operate the transmitter when someone is within 20 cm of the antenna
operate the transmitter unless all RF connectors are secure and any open connectors are
properly terminated
operate the equipment near electrical blasting caps or in an explosive atmosphere
SAFETY Notice:
Exposure to RF energy is an important safety consideration. The FCC has adopted a
safety standard for human exposure to radio frequency electromagnetic energy emitted by
FCC regulated equipment as a result of its actions in Docket 93-62 and OET Bulletin 65
Edition 97-01.