User's Manual

Page 48 E2 Wireless I/O
4.9 System Tools
This screen is where you can log system instructions, etc to the screen and from there
you can save to a file.
This screen also is where any uploading and saving of the configuration is done.
Reading Configuration File
Reads the module configuration into an XML file for saving.
Writing Configuration File
Allows you to load an XML configuration file into the module and then reset
Firmware Upgrade
This option allows the module firmware to be updated by loading a special firmware file
into the module and then performing a reset. The module will then go through a boot
routine and loads the new firmware.
4.10 Address Map
The I/O data store provides storage of all I/O data in the system. The data store
provides services to other processes, and is configured indirectly by the other
processes making use of it’s services.
The I/O Store provides eight different “data files”. Two bit files, two word files, two long-
word files and two floating point files. The two files of each type in turn support inputs
and outputs on the local machine, and data storage for the gateway function of the
machine.